Recommended Add-Ons
At a Glance
Why Choose This Product
Removes multiple layers of paint, varnish, enamel, urethane, sealers and some epoxies
Stays on horizontal and vertical surfaces during stripping
Non-caustic and made without methylene chloride, acetone or mineral spirits
Suitable for wood, metal, concrete and masonry
Contains lead-based coatings within the gel during removal
Apply by pouring or with a brush, squeegee or commercial airless sprayer
Product Information
BLUE BEAR® 605PRO with Safenol™ is a professional paint stripper formulated to remove multiple layers of paint, lead-based paint, varnish, latex, enamel, urethane, sealers, some epoxies, and other single-component coatings. The non-caustic gel is made without methylene chloride, acetone, or mineral spirits and is designed to remove multiple coating layers in one application.
The thick gel formula clings to horizontal and vertical surfaces for use as a wood stripper, metal stripper, concrete stripper, and masonry stripper. Its low-odor formula is suitable for indoor and outdoor renovation, restoration, and surface preparation projects. Always test a small, inconspicuous area before treating the complete surface.
When removing lead-based paint, the coating becomes encapsulated within the stripping gel to help prevent airborne lead particles during removal. Collect the removed coating and gel, then dispose of the material according to all applicable local, state, and federal regulations.
Shake well and apply a thick layer by pouring or using a brush, squeegee, or commercial airless sprayer. Allow the coating to soften completely before removing it with a scraper. Average coverage is approximately 125 square feet per gallon on horizontal surfaces and 75 square feet per gallon on vertical surfaces. Remaining residue can be cleaned with BLUE BEAR® Emerge™ 700DG Degreaser or water and a scrub brush, mop, or power washer.
Product Resources
Common Questions
It is formulated to remove multiple layers of paint, lead-based paint, varnish, latex, enamel, urethane, sealers, some epoxies, and other single-component coatings.
The stripper is designed for use on wood, metal, concrete, and masonry. Always test a small, inconspicuous area before treating the complete surface.
Do not use 605PRO on PVC, drywall, limestone, plastic, veneer, terrazzo tile, or rubber.
No. BLUE BEAR 605PRO contains no methylene chloride, acetone, or mineral spirits.
Shake the container well, then apply a thick layer by pouring or using a brush, squeegee, or commercial airless sprayer. When the coating begins to buckle, test it with a scraper. Allow additional time if the coating has not softened completely.
Yes. The gel encapsulates the lead-based coating during removal to help prevent airborne particles. Collect and dispose of the removed material according to all applicable regulations.
Average horizontal coverage is approximately 125 square feet per gallon, with a maximum of up to 200 square feet per gallon under suitable conditions. Average vertical coverage is approximately 75 square feet per gallon. Actual coverage depends on the coating type, age, number of layers, surface, and application method.
Yes. The low-odor formula is designed for indoor and outdoor use. Wear safety glasses, chemical-resistant gloves, and work-appropriate shoes as directed by the technical data sheet, and follow all current label and safety instructions.
Use BLUE BEAR Emergeâ„¢ 700DG Degreaser or water with a scrub brush, mop, or power washer to remove remaining thin residue. Remove excess coating and stripper before using a power washer.
