With over 100,000 orders
With over 100,000 orders
At a Glance
Why Choose This Product
Gives unglazed clay surfaces a naturally aged appearance
Reduces penetration into treated surfaces
Helps keep treated surfaces easier to clean and care for
Improves the durability of interior clay surfaces
Applies without mixing or dilution
Suitable for unglazed terracotta, brick pavers and clay tile
Product Information
HMK® P328 Terracotta Wax is a ready-to-use, solvent-based natural wax for unglazed terracotta, brick pavers, and clay tile. Special additives give treated surfaces an antique, rustic appearance that complements the natural character of interior clay installations.
The wax reduces water and dirt penetration, helping treated surfaces remain easier to clean and more durable. It provides practical protection while preserving the distinctive appearance and texture of terracotta, brick, and clay tile.
P328 applies without mixing or dilution and can be buffed by hand or with suitable polishing equipment after drying. It is designed for dry interior surfaces and works with HMK® P326 Terracotta Care as part of an ongoing maintenance system.
Common Questions
HMK® P328 is designed for unglazed terracotta, brick pavers, and clay tile surfaces.
Special additives give treated surfaces an antique, rustic appearance that enhances their natural character.
Yes. The wax reduces water and dirt penetration, helping treated surfaces remain easier to maintain and more durable.
No. HMK® P328 is intended for interior use only and should not be applied in wet areas such as shower stalls.
Thoroughly clean the surface and allow it to dry until the residual moisture content is no more than 2% to 4%. Turn off underfloor heating and allow the surface to cool before treatment.
Shake the product well, then apply it thinly and evenly using a suitable application brush, white terry cloth, or soft brush. Rub it in gently and allow it to dry before buffing by hand or with suitable polishing equipment. Very absorbent surfaces may require another treatment.
Allow HMK® P328 to cure for 24 to 48 hours before applying HMK® P326 Terracotta Care. P326 can help blend unevenness in the wax finish.
Repeat the treatment according to surface use, but at least once per year to help maintain its appearance and protection.