Recommended Add-Ons
At a Glance
Why Choose This Product
Keeps the ESC-125 aligned with the guide rail during cutting
Guides cutter movement along a fixed straight-line path
Reduces edge deviation on straight fabrication cuts
Built specifically for the Alpha ESC-125 stone cutter
Uses the existing holding mechanism without tool modification
Improves cutting control across larger slabs and hard surfaces
Product Information
The Alpha® ESC-125 Guide Rail Carriage Assembly creates a fixed mounting interface between the Alpha ESC-125 Wet/Dry Stone Cutter and the Alpha Guide Rail System. The rail-guided configuration maintains stable cutter alignment and controlled straight-line travel across stone, slab, and other hard surface materials.
The carriage assembly is built specifically for the ESC-125 and installs using the cutter's factory holding mechanism after removal of the standard TT Guide. This allows the ESC-125 to transition from handheld cutting to a guided rail setup without additional modification to the tool.
For fabrication work requiring consistent straight cuts, the carriage provides a stable interface between the cutter and guide rail. Guided movement reduces edge deviation and improves control when cutting larger stone and hard surface formats where maintaining a straight cutting path by hand can be difficult.
Common Questions
The carriage assembly mounts the Alpha ESC-125 Wet/Dry Stone Cutter to the Alpha Guide Rail System, creating a guided setup for controlled straight-line cutting.
The carriage assembly is designed specifically for the Alpha ESC-125 Wet/Dry Stone Cutter.
Yes. It creates the mounting interface needed to use the ESC-125 with the Alpha Guide Rail System.
The carriage assembly is intended for straight cuts using the ESC-125 and Alpha Guide Rail System.
Remove the standard TT Guide and install the carriage assembly using the ESC-125's factory holding mechanism. No additional modification to the cutter is required.
The rail-guided configuration maintains cutter alignment and provides more controlled straight-line movement, reducing edge deviation when cutting larger stone, slab, and hard surface materials.
