Certified Business
With over 100,000 orders
With over 100,000 orders
Alpha ESC-150/ESC-250 6" Electric Wet/Dry Stone Cutters
Fast Shipping
Easy Returns
Secure Checkout
At a Glance
Quick Decision Guide
Voltage
110V
Power
1200W
Blade Diameter
6"
Maximum Cutting Depth
2"
No-Load Speed
10,000 RPM
Arbor
7/8"
Miter Capacity
Up to 1-1/4" Material
Cutting Method
Wet & Dry
Why Choose This Product
Key Benefits
Wet/Dry Operation
Supports water-fed cutting or dry cutting with a connected HEPA vacuum
2" Cutting Depth
Cuts 1-1/4" stone slabs in a single pass
Miter Capability
Cuts miters in material up to 1-1/4" thick
Fabrication Versatility
Handles straight cuts, sink openings and rodding grooves
Material Compatibility
Cuts natural stone, quartz surfaces, concrete and porcelain slabs
Flexible Water Hose
Kink-free 15' hose improves maneuverability during wet cutting
HEPA Vacuum Connection
Built-in dust gate supports dust collection during dry operation
Guide Rail Expansion
Optional ASC-6CSM carriage supports guided straight and miter cuts
Product Information
Product Details
Specifications
Brand
Alpha®
Part Number
ESC-150
UPC
749173621413
Product Type
Electric Wet/Dry Stone Cutter
Voltage
110V
Amperage
11.2A
Power
1200W
Cutting Method
Wet & Dry
Cutting Disc Diameter
6" (150mm)
Maximum Disc RPM
10,000 RPM
No-Load Speed
10,000 RPM
Maximum Cutting Depth
2" (50.88mm)
Miter Capacity
Up to 1-1/4" (3cm) Material
Arbor
7/8" (22.23mm)
Compatible Materials
Granite, Quartz Surfaces, Marble, Limestone, Concrete & Sintered/Porcelain Slabs
Applications
Straight Cutting, Miter Cutting, Sink-Hole Cutting & Groove Cutting/Rodding
Dust Collection
Built-In Dust Gate for HEPA Vacuum Connection
Water Feed
Kink-Free Water Hose with Quick Coupler & Shut-Off Valve
Cord
15 ft (4.5m), Single Phase
Plug Type
Type A
Weight
11.30 lbs (5.12 kg)
Guide Rail Compatibility
Alpha Guide Rail System with Available Carriage Assembly
Warranty
1 Year Tool Warranty
Included Equipment
Side Handle, M6x30 Left Screw, Flange-3, 15 ft Water Hose Assembly, Water Quick Coupler with Shut-Off Valve, Carbon Brush Set, Water Valve Assembly, 3 M4x10 SS Flat Head Screws, Ground Fault Circuit Interrupter, End Cap, T-Handle Wrench, 17mm Open-End Wrench, Easy On-Easy Off Sleeve, Self-Stick Felt Strip Set & 5mm Hex Wrench
About This Product
6" Wet/Dry Stone Cutters
The Alpha® ESC-150 and ESC-250 are portable electric stone cutters for granite, quartz surfaces, marble, limestone, concrete, and sintered or porcelain slabs. Their 1200W motors operate 6" cutting discs at 10,000 RPM and provide a maximum cutting depth of 2", allowing 1-1/4" (3cm) stone to be cut in a single pass. With the appropriate blade, the handheld design also provides a portable tile cutter alternative when a stationary tile saw is impractical.
Miter, Sink Cutout and Rodding Cuts
Each stone cutter can miter material up to 1-1/4" (3cm) thick without an extensive stationary cutting setup. The tools also support sink-hole cutting and groove cutting for steel or fiberglass rodding applications. For guided straight and miter cuts, the optional ASC-6CSM Carriage Assembly connects the cutter to the Alpha Guide Rail System. The carriage and guide rails are sold separately.
Wet Cutting and HEPA Dust Control
For use as a wet stone cutter, the included 15' kink-free water hose supplies water while remaining flexible for easier maneuverability. An EasyOn-EasyOff Sleeve bundles the water hose and power cord to reduce drag during longer cuts. For dry stone cutter applications, the built-in dust gate connects to a compatible HEPA vacuum to collect dust near the cutting area. The vacuum is not included.
Blade Options for Stone and Porcelain
The 7/8" arbor accepts 6" cutting discs, with blade selection determined by the material and application. Alpha identifies the 6" Katana blade for porcelain panels and slabs, the 4" Hot-Rod blade for grooves used with 1/4" steel rods or 1/8" fiberglass rods, and the 5" Libero blade for marble slabs typically measuring 3/4" (2cm) thick or less. Cutting blades are sold separately.
Product Resources
Documentation & Downloads
Common Questions
Frequently Asked Questions
What materials can the Alpha ESC-150 and ESC-250 stone cutters cut?
The cutters are designed for granite, quartz surfaces, marble, limestone, concrete, and sintered or porcelain slabs when fitted with the appropriate cutting blade.
What is the maximum cutting depth?
The ESC-150 and ESC-250 provide a maximum cutting depth of 2" (50.88mm) and can cut 1-1/4" (3cm) stone slabs in a single pass.
Can the ESC-150 and ESC-250 make miter cuts?
Yes. Both models can miter material up to 1-1/4" (3cm) thick. An optional ASC-6CSM carriage and Alpha Guide Rail System can be used when guided miter cutting is required.
Can these stone cutters be used wet or dry?
Yes. The included kink-free water hose supports wet cutting, while the built-in dust gate connects to a compatible HEPA vacuum for dry dust collection.
What size cutting discs do the ESC-150 and ESC-250 use?
Both models accept 6" (150mm) cutting discs with a 7/8" (22.23mm) arbor and operate at a maximum no-load speed of 10,000 RPM.
Can these cutters be used for sink-hole and rodding work?
Yes. The cutters can create sink openings and cut grooves for rodding applications when equipped with the appropriate blade.
What is the difference between the ESC-150 and ESC-250?
The ESC-150 operates at 110V and 11.2A with a Type A plug. The ESC-250 operates at 220V and 5.5A with a Type C plug. Both models use a 1200W motor and 6" cutting discs.
Which guide rail carriage fits the ESC-150 and ESC-250?
The ESC-150 and ESC-250 require the Alpha ASC-6CSM Carriage Assembly. The smaller ASC-5CSM carriage is designed for the 5" ESC-125 and is not compatible with these 6" stone cutters.