Transform your stone surfaces with HMK® R183 Cement Film Remover—an advanced, acid-based cleaning concentrate designed to tackle tough construction dirt, cement films, and limescale. Ideal for both interior and exterior use, this powerful solution is perfect for removing residue from all acid-resistant natural and artificial stone, including granite, sandstone, ceramic, porcelain, and more.
Key Features
-
Effective Removal: Specially formulated to dissolve and lift cement residue, mortar, grout, and limescale with ease.
-
Versatile Use: Suitable for a wide range of surfaces including granite, ceramic tiles, brick tiles, and rough concrete.
-
Safe for Acid-Resistant Stones: Perfect for natural and artificial stones that can handle acidic solutions.
-
Non-Phosphoric: Free from salt and phosphoric acid, reducing environmental impact while maintaining effectiveness.
Benefits
-
Powerful Cleaning: Quickly loosens and removes stubborn dirt and residues, restoring the natural beauty of your surfaces.
-
Ease of Use: Dilute and apply to dirty areas, scrub, and rinse—simple, efficient cleaning process.
-
Enhanced Appearance: Leaves surfaces free from unsightly stains and residue, improving the look and feel of your stone or concrete.
How to Use
-
Preparation: Turn off underfloor heating and allow the surface to cool to its natural temperature.
-
Application: Dampen the area with clean water. Dilute HMK R183 with water (1:2 to 1:10) depending on contamination level.
-
Cleaning: Apply the solution and scrub with a brush or floor pad. Keep the area moist by sprinkling water if needed.
-
Removal: After a few minutes, scrub again and remove the solution using a wet vac or rinse with water.
-
Final Rinse: Clean the area with R155 Intensive Cleaner (diluted 1:20) to neutralize and lift any remaining residue. Rinse thoroughly with clean water.
Coverage
-
1:2 Dilution: Up to 100-350 sq ft
-
1:10 Dilution: Up to 500-1750 sq ft
Important Considerations
-
Not Suitable For: Polished or fine honed marble, limestone, decorative concrete, and other acid-sensitive surfaces.
-
Protect: Ensure surrounding items like painted surfaces, waxed wood, and plastics are well protected from direct contact and vapors.
Working Temperature
-
Ideal Range: 50°F to 80°F
-
Avoid: Direct sunlight during application.
Storage
-
Conditions: Store in a cool, dry place (max. +80°F). Use within 2 years of purchase. Keep out of reach of children.
Warning
-
Caution: Contains surfactants and acids. Avoid contact with eyes and skin. Flush with water if exposed. Refer to the Material Safety Data Sheet for detailed safety information.
Restore your surfaces to pristine condition today! Order HMK® R183 Cement Film Remover now and experience professional-quality cleaning at home.
