With over 100,000 orders
With over 100,000 orders
At a Glance
Why Choose This Product
Removes moss, mold, mildew, fungus, and lichens
Applies directly from the bottle without dilution
Suitable for polished, honed, and textured surfaces
Cleans stone surfaces indoors and outdoors
Helps bleach stains from beverages, berries, flowers, and fruit
Helps restrict future growth after existing contamination is removed
Product Information
HMK® R160 Moss, Mold & Mildew Remover is a fast-acting spray cleaner for removing moss, mold, mildew, fungus, and lichens from natural and artificial stone. The undiluted formula is ready to apply directly from the bottle for smaller cleaning and restoration projects.
Use HMK R160 on polished, honed, and textured stone without damaging properly finished polished surfaces. The cleaner is suitable for interior and exterior applications, including steps, walkways, gravestones, walls, garden ornaments, and similar stone surfaces.
In addition to biological growth, HMK R160 helps bleach organic stains caused by coffee, cola, red wine, flowers, berries, fruit, and fruit juice. This versatility makes it useful for addressing several common sources of discoloration with one stone cleaner.
Apply HMK R160 to a cool, dry surface, allow it to work for a few minutes without drying, scrub with a suitable brush or pad, and rinse thoroughly with clean water. After treatment, allow the stone to dry for 12 to 24 hours before applying a suitable HMK impregnator to reduce water penetration and further restrict regrowth.
Common Questions
HMK® R160 removes moss, mold, mildew, fungus, and lichens. It also helps bleach organic stains caused by coffee, cola, red wine, flowers, berries, fruit, and fruit juice.
It is suitable for polished, honed, and textured natural and artificial stone surfaces. Properly finished polished stone will not be damaged when the cleaner is used as directed.
Yes. HMK R160 is suitable for interior and exterior stone surfaces, including steps, walkways, gravestones, walls, garden ornaments, and similar smaller areas.
No. The cleaner is supplied ready to use and should be sprayed undiluted directly onto the surface.
Apply it to a cool, dry surface and allow it to work for a few minutes without letting it dry. Scrub with a stiff brush, scrubbing brush, or suitable pad, then rinse thoroughly with clean water. Repeat the process if heavy contamination remains.
Yes. It helps restrict regrowth after cleaning. For additional protection, allow the stone to dry for 12 to 24 hours before applying a suitable HMK impregnator to reduce water penetration.
One 0.5-liter spray bottle covers approximately 60 to 80 square feet, depending on the surface and level of contamination.
Do not apply the cleaner in direct sunlight or at temperatures below 50°F or above 80°F. Protect nearby textiles, metals, plants, flowers, and other non-masonry surfaces from contact or splashes. Always test an inconspicuous area before full application.