With over 100,000 orders
With over 100,000 orders
At a Glance
Why Choose This Product
Penetrates up to 2 cm beneath the surface
Targets oil, grease, wax, mastic, silicone and mineral deposits
Suitable for stone, ceramic, porcelain and concrete
Treats polished, fine-honed and textured surfaces
Supports indoor and outdoor restoration projects
Removes contamination caused by unsuitable sealers and mastics
Product Information
HMK® R152 Oil and Wax Remover is an active cleaning paste and poultice for extracting embedded oil, grease, wax, mastic stains, silicone smears, and mineral deposits. It penetrates up to 2 cm beneath the surface, helping remove absorbed contaminants that routine surface cleaning may leave behind.
R152 is suitable for natural and engineered stone, ceramic, porcelain, and concrete. It can be used on polished, fine-honed, and textured finishes, providing a versatile stain removal option for a wide range of interior and exterior surfaces.
In addition to treating surface stains, R152 removes contamination around tile edges caused by unsuitable silicone, grout, and mastic sealers. Difficult or deeply embedded stains can be treated more than once when additional cleaning is required.
Common Questions
HMK® R152 removes oil, grease, wax, mastic stains, silicone smears, mineral deposits, and contamination caused by unsuitable silicone, grout, or mastic sealers.
R152 is suitable for natural and engineered stone, ceramic, porcelain, and concrete. It can be used on polished, fine-honed, and textured finishes.
The cleaning poultice penetrates up to 2 cm beneath the surface to help extract deeply embedded oil, grease, wax, and other contaminants.
Apply the cleaning paste with a putty knife or spatula and work it into the surface with a brush. Add more material until the poultice layer is at least 1/8" thick, then allow it to dry completely.
Drying typically takes 10 to 12 hours, depending on temperature and ventilation. Once dry, brush away the hardened poultice without scraping, clean the treated area, and rinse thoroughly. Difficult stains may require a second or third treatment.
Yes. R152 can remove contamination around tile edges caused by unsuitable silicone, grout, or mastic sealers. Existing grout or sealer must be removed from the affected joint before treatment.
Yes. HMK® R152 is suitable for both interior and exterior applications.
Protect the treatment area from direct sunlight and wind while the poultice dries. Turn off underfloor heating and allow the surface to cool before application. Do not use R152 on rubber, plastic, lacquered or varnished surfaces, or other solvent-sensitive materials.