The Alpha® PSC-150 Pneumatic Stone Cutter is an air-powered circular saw designed for industrial stone cutting, mitering, and fabrication. Powered by a 2 HP air-driven motor with an integrated speed governor, it regulates air consumption based on torque demand to maintain consistent cutting performance.
This circular saw is capable of cutting and mitering stone slabs up to 1-1/4" (3 cm) thick in a single pass and supports sink-hole cutting, groove cutting, and rodding applications. Its air-powered design reduces maintenance associated with electric circular saws and supports both wet and dry operation.
Key Features
- 2 HP Pneumatic Motor: Integrated speed governor adjusts air consumption based on cutting load.
- Single-Pass Cutting Capacity: Cuts and miters stone up to 1-1/4" (3 cm) thick.
- Industrial Duty Cycle: Rated for up to 2,000 hours of operation.
- Kink-Free Air and Water Hoses: Improves maneuverability and reduces operator fatigue during cutting.
- Wet or Dry Cutting Capability: Supports flexible use depending on fabrication requirements.
- Guide Rail Compatibility: Can be used with an Alpha® guide rail carriage for controlled miter cutting.
- Included Cutting Blade: Supplied with an Alpha® Eclipse II 6" blade for granite and engineered stone.
Specifications
| Specification | Details |
|---|---|
| Model | PSC-150 |
| Power Type | Pneumatic |
| Max Power | 2.0 HP |
| Air Pressure | 90 PSI (6.2 bar) |
| Air Consumption | 32–48 CFM |
| No Load Speed | 8,500 RPM |
| Blade Diameter | 6" (150 mm) |
| Arbor | 7/8" (22.23 mm) |
| Weight | 10.3 lbs (4.6 kg) |
Included Equipment
- Alpha® Eclipse II 6" Blade
- Air Hose (15 ft)
- Water Hose (15 ft)
- Rust Inhibitor Oil (8 oz)
- Side Handle
- Flanges and Mounting Hardware
- Combination and Hex Wrenches
- Mufflers and Reduced Flow Air Inlet Fitting
The Alpha® PSC-150 Pneumatic Stone Cutter provides controlled, air-powered cutting performance for stone fabrication tasks including straight cuts, miters, sink openings, and rodding operations.
