The Alpha Libero Diamond Blade is a diamond blade engineered for dry cutting of soft natural stone materials including marble, travertine, limestone, onyx, soapstone, and alabaster. The blade uses an advanced electroplated bond to deliver controlled cutting performance while reducing edge chipping and surface cracking commonly associated with dry cutting softer materials.
Designed for use on angle grinders and wet stone cutters operating in dry applications, this dry cutting blade provides aggressive material removal with a thin kerf profile to help minimize finishing work and reduce material waste. The precision electroplated diamond edge supports detailed fabrication work, curved cuts, and intricate shaping commonly required in marble fabrication and installation.
The blade is recommended for softer grades of natural stone where clean edge quality is critical. Its construction allows fabricators, installers, contractors, and sculptors to perform accurate cuts both in shop environments and field applications.
Key Features
- Electroplated Diamond Edge: Designed for controlled dry cutting of softer stone materials.
- Chip-Reduced Cutting: Supports cleaner edge finishes on marble and limestone.
- Thin Kerf Design: Helps reduce material loss and finishing time.
- Soft Stone Application: Recommended for marble, travertine, onyx, soapstone, alabaster, and limestone.
- Angle Grinder Compatible: Designed for use on common stone cutters and angle grinders.
- Dry Blade Operation: Engineered for dry cutting performance.
Specifications
| Part No. | Size | Thickness | Max RPM | Arbor(s) |
|---|---|---|---|---|
| DL0478 | 4" | 0.8mm | 14,500 | 7/8", 20mm, 5/8" |
| DL05A+ | 4-1/2" | 0.8mm | 13,200 | 7/8", 20mm |
| DL05S | 5" | 1.0mm | 12,200 | 7/8" |
| DL06A+ | 6" | 1.2mm | 10,100 | 7/8", 5/8" |
| DL07A+ | 7" | 1.4mm | 8,400 | 5/8" |
This dry blade provides precise cutting performance on softer natural stone materials where edge quality and reduced chipping are critical.