Recommended Add-Ons
At a Glance
Why Choose This Product
Six grits refine granite from 150 through 3000 grit
Conforms to curved edges and confined polishing areas
Follows tight contours inside undermount sink openings
Available in 3", 4" and 5" diameters
Designed for low-speed, center water-feed hand polishers
Heat-sintered resin construction supports reliable results
Product Information
Alpha® Ceramica Resin Diamond Polishing Pads are flexible wet polishing pads designed specifically for granite. The six-grit sequence progresses from 150 through 3000 grit to refine granite edges and profiles throughout the resin-polishing stages.
Heat-sintered in a mold with a durable resin compound, Ceramica Resin polishing discs conform to curved granite edges and confined areas. Their flexibility helps the pads follow sinkhole contours for undermount sinks and other locations where rigid discs are difficult to position.
Ceramica Resin polishing pads are available in 3", 4", and 5" diameters with 150, 300, 500, 1000, 2000, and 3000 grits. All sizes use hook-and-loop backing and are designed for compatible low-speed hand polishers with a center water feed. The maximum operating speed is 4,000 RPM.
Product Resources
Common Questions
Ceramica Resin polishing pads are designed specifically for wet hand polishing granite.
The polishing pads are available in 150, 300, 500, 1000, 2000, and 3000 grits for progressive granite polishing.
Ceramica Resin polishing pads are available in 3", 4", and 5" diameters. All three sizes are offered in the complete 150 through 3000 grit sequence.
Yes. Their flexible resin construction allows the pads to conform to curved granite edges and other areas where rigid polishing discs are difficult to position.
Yes. The flexible discs are suited for tight, curved areas such as sinkholes for undermount sinks.
They are wet polishing pads designed for use with compatible low-speed, center water-feed hand polishers. They are not intended for dry polishing or high-speed angle grinders.
Alpha recommends operating Ceramica Resin polishing pads between 2,000 and 2,500 RPM. The maximum operating speed is 4,000 RPM and should not be exceeded.
All Ceramica Resin sizes and grits use a hook-and-loop attachment.
