Rubi Delta Leveling System Clips Pliers are designed to be used with the Rubi Delta Leveling System to aid installers in floor and wall applications. The Rubi Delta Leveling System also prevents the movement of the tiles during the setting of the adhesive and, during installation, the number of corrections in the position of the ceramic tile itself is reduced. The basic principle of the Delta Leveling System is that of pressing the highest piece, until matching its position with the adjacent tiles, thus obtaining a substantial improvement of the surface flatness. Rubi Delta Leveling System Pliears are recommended to be used with the Rubi Delta Leveling System on formats of 12″ x 12″ or greater and varied thicknesses of up to 12, 15 or 20 mm, depending on the model of clip used. The use of the Delta System is fast, easy and intuitive. Once the installation is complete, the elements of the system are removed by impact (kick or mallet), striking the clips always in the direction of the joint. The Delta System wedges can be reused several times. The Rubi Delta Leveling System Pliers is designed to be used both in installation work of horizontal (floor) and vertical (cladding) ceramic tiles. The main function of the Delta leveling pliers is to give the wedge the necessary pressure to allow the leveling of the ceramic tile. See 1/32” clips, 1/16″ clips, 1/8″ clips, wedges.