raimondi

The Raimondi® Raizor Cutting System is a scoring and snapping rail system designed for cutting large format tile. The system uses connected aluminu...

Raimondi® VITE Tile Leveling Caps are reusable screw-on caps designed for use with Raimondi VITE leveling clips. The caps apply downward pressure b...

The Raimondi® Heavy Duty Tile Leveling System Kit is a clip and wedge tile leveling system designed for 1/16" grout joints and tile thicknesses fro...

Raimondi® 1/32" (1mm) Tile Leveling Clips are designed for use with Raimondi wedges to maintain a 1/32" grout joint and assist with tile leveling d...

The Raimondi® Raizor Cutting System Extension is a 3.4 ft rail extension designed to increase the cutting length of the Raimondi Raizor scoring and...

The Raimondi® Corner Protector Set is a set of clip-on corner protectors designed for tile, slabs, and panels. The protectors fit materials from 1/...

The Raimondi® Cutting Off Pliers apply controlled pressure along scored lines for clean separation of thin tile and slab materials. Designed for po...

The Raimondi® Easy Wash Bucket is a grout cleaning bucket designed for sponge rinsing, wringing, and grout residue removal during tile installation...

The Raimondi Epoxy Grout Float is designed for applying and finishing epoxy and cement-based grout on floors and walls. Its dual-angle antiabrasion...

The Raimondi® Flow Ridge Trowel is a stainless steel tile trowel engineered to improve adhesive coverage through a slanted, rounded notch profile. ...

The Raimondi® Full Frame 8-Suction Cup Easy-Move is a handling system designed for transporting and positioning large format tile slabs. The full-f...

The Raimondi Gladiator 105 Wet Tile Saw is a bridge-style wet saw for straight, diagonal, and bevel cuts on porcelain, ceramic, stone, and masonry ...

The Raimondi® Heavy Duty Tile Leveling Clips are part of the Raimondi Tile Leveling System and are used to create consistent grout joint spacing du...

The Raimondi® Iperbet Mortar Mixer is a bucket-style mixing system designed for thinset, grout, plaster, concrete, quartz plaster, and other fluid ...

The Raimondi Krick Krock Wall Leveling Guide is an adjustable support system used to establish a level starting course for wall tile installations....

The Raimondi® Pedalo Wash Master Grout Station is a grout cleaning system designed for use with pole-mounted floor sponges on floors and walls. Its...

The Raimondi® Power Miter Jolly mounts to standard 4.5" angle grinders for controlled 45° miter cutting on porcelain, ceramic, and similar tile mat...

The Raimondi Pulirapid Wash Bucket is a grout cleanup system designed for cleaning sponges during wall and floor tile installations. It features a ...

The Raimondi® Red Brick Dressing Stone is designed to restore and maintain the cutting performance of diamond blades, core bits, and drill bits. By...

The Raimondi® Skipper Wash Bucket is designed for cleaning grout during wall and floor tile installations. It features a 3.4-gallon tank, dual roll...

The Raimondi® Smart Grout Float is a grout float designed for grout application on floor and wall tile installations. It features a rigid body, erg...

The Raimondi® Smart Wash Bucket is a grout wash bucket designed for cleaning grout during wall and floor tile installations. It features a 2.7-gall...

Raimondi® Sponges are replacement sponge pads designed for use with compatible Raimondi sponge floats and cleaning systems. They are available in m...

The Raimondi Tile Leveling Floor Pliers are designed to tighten wedges into leveling clips during floor tile installation. Adjustable tension contr...