The wedi Linear Shower Module is a tile ready linear shower pan system consisting of a linear drain module and compatible sloped extension panel used together to construct custom shower bases with one-directional slope.
This shower pan supports drain placement near a wall and provides consistent slope geometry for large format tile installation without miter cuts. The system is designed to integrate with a mechanical compression drain connection that maintains a sealed interface between the drain module and plumbing.
Components are selected individually and combined to create modular shower base layouts. Sloped extensions may be cut, interlocked, or joined on site to accommodate project-specific dimensions.
Key Features
- Modular Shower Floor System: Drain module and sloped extensions are selected separately to build custom layouts.
- One-Directional Slope: Directs water toward linear drain placement.
- Mechanical Drain Connection: Connects to 2" PVC, ABS, or cast iron waste pipes without glue or sealants.
- Compression Fit Tolerance: Accommodates pipe misalignment up to 5°.
- No Field-Applied Waterproofing: Components install without manual membrane application at the drain.
- Adjustable Drain Covers: Accommodate tile thickness from 1/4" to 1".
- High Flow Capacity: Linear drain flow rates exceed 14 gallons per minute when plumbing is unobstructed.
- Tile Ready Surface: Cement-based resin surface supports direct tile installation using cement or epoxy adhesives.
Installation & System Notes
- Drain modules and sloped extensions are ordered separately.
- Sloped extensions may be cut or joined to fit custom layouts.
- Prefabricated extensions are pre-notched and can be mitered or interlocked on site.
- When used as part of a complete wedi shower assembly, the system is covered under a single manufacturer warranty.
This system is used to build modular linear drain shower bases with integrated slope and mechanically sealed drainage connections.
