Skip to content
Tile This

Miracle Sealants

Miracle Sealants Mira Hone Marble & Travertine Honing Powder

Non-Acid 400-Grit Honing Powder for Calcium-Based Stone

$36.14

In Stock

8 in stock and ready to ship.

MPN:
MIRHON
UPC:
753927512605

Free Shipping Over $200 Details

Contractor Discount Eligible Learn More

At a glance

Full specifications
Container Size
1 lb
Coverage
80–115 Sq. Ft.
Stone Types
Marble, Travertine, Limestone & Terrazzo
Formula
Natural Non-Wax Powder

Product Benefits

  • Stone Surface Restoration Removes light scratches, etch marks and traffic patterns from compatible stone
  • Approximately 400-Grit Refinement Hones worn surfaces to create a consistent finish ready for polishing
  • Deep Cleaning Action Cleans marble, travertine, limestone and terrazzo while honing the surface
  • Lippage Compatibility Works on floors with uneven tile edges where some other abrasion methods may not
  • Pre-Polish Preparation Refines the stone before applying Mira Dust or another compatible final polish
  • Non-Coating Formula Leaves no wax or topical layer that could yellow or require future stripping

Specifications

Brand
Miracle Sealants®
Part Number
MIRHON
UPC
753927512605
Product Type
Natural Stone Honing Powder
Container Size
1 lb
Coverage
80–115 Sq. Ft.
Formula
Natural Non-Wax Powder
Acid Content
Non-Acid
Finish Type
Non-Coating
Compatible Materials
Marble, Travertine, Limestone & Terrazzo
Removes
Light Scratches, Etch Marks & Light Traffic Patterns
Suitable for Lippage
Yes
Preparation for Polishing
Yes
Application Areas
Floors, Kitchens, Counters, Restrooms & Showers
Yellowing
Never Yellows
Stripping Required
No

Product details

Miracle Sealants® Mira Hone is an approximately 400-grit marble and travertine honing powder that deep cleans limestone, terrazzo and other compatible stone while removing light scratches, etch marks and traffic wear. The non-acid, non-wax compound prepares worn surfaces for final polishing without leaving a coating.

Hone and Restore Worn Natural Stone

Miracle Sealants® Mira Hone is a natural, non-wax honing powder that deep cleans and refines marble, travertine, limestone and terrazzo. It removes light scratches, etch marks and lightweight traffic patterns, helping restore worn floors, counters and other stone surfaces instead of temporarily concealing the damage with wax or a topical coating.

Approximately 400-Grit Honing Action

Mira Hone provides honing action comparable to an approximately 400-grit abrasive. The compound works with water to refine surface wear and produce an evenly honed finish while deep cleaning the stone. Its non-acid, non-coating formula never yellows and does not require stripping after the restoration is complete.

Effective on Floors with Lippage

This marble and travertine honing powder can be used effectively on floors with lippage where some other honing or abrasion methods may not work. That compatibility gives stone restoration professionals an additional option for addressing scratches, etching and visible traffic patterns across installations with uneven tile edges.

Prepares Stone for a Higher Final Polish

Mira Hone creates a refined surface that is ready for one of Miracle Sealants' compatible final polishing compounds, including Mira Dust. This two-stage approach allows the honing powder to correct surface wear before the polishing compound develops the desired shine, helping restore the stone's natural beauty with clearly defined honing and polishing steps.

Resources

Product questions

What types of stone and surfaces can Mira Hone be used on?

Mira Hone is formulated for marble, travertine, limestone and terrazzo. Manufacturer-listed applications include floors, counters, kitchens, restrooms and showers. Because stone composition and finish can vary, the data sheet directs users to complete inconspicuous test patches and confirm suitability before treating the full area.

What surface damage can Mira Hone remove?

The honing powder removes light scratches, etch marks and lightweight traffic patterns while deep cleaning the stone. Its approximately 400-grit abrasive action refines worn surfaces rather than adding a temporary shine, leaving the material ready for continued honing or a compatible final polishing compound.

Can Mira Hone be used on floors with lippage?

Yes. Miracle Sealants states that Mira Hone can be used effectively on floors with lippage where some other honing or abrasion methods may not work. It can address surface wear on these installations, but the manufacturer does not describe the powder as a product for flattening or eliminating lippage.

Does Mira Hone contain acid, wax or a surface coating?

Mira Hone is described as a natural, non-wax and non-acid powder compound. It does not leave a topical coating, never yellows and does not require stripping after use. The product contains a corrosive ingredient, however, so the current label and safety data sheet must still be followed.

Should Mira Hone be followed with a polishing powder?

Yes. Mira Hone prepares the honed stone surface for a compatible final polishing product, including Mira Dust. The honing compound handles surface refinement and defect removal, while the final polishing step develops a higher shine, allowing each product to perform a distinct role in the restoration process.

Does Mira Hone require a floor machine?

The product data sheet describes machine honing with a natural-hair brush or red nylon pad. The compound is worked with water as a slurry and must not be allowed to dry on the surface. Consult the current label for complete preparation, application, cleanup and safety requirements.

How much area does Mira Hone cover?

Coverage varies with stone density, porosity, texture, absorption, surface condition and application method. Miracle Sealants estimates approximately 80 to 115 square feet per pound when Mira Hone is used as directed. Heavily worn or absorbent surfaces may fall toward the lower end of the stated range.