With over 100,000 orders
With over 100,000 orders
At a Glance
Why Choose This Product
Penetrates up to 2 cm to remove embedded stains
Safe for natural stone, engineered stone, tile and concrete
Suitable for polished, fine-honed and textured finishes
Removes oil, grease, wax, mastic, silicone residue and mineral deposits
Suitable for indoor and outdoor applications
Cleans tile edges affected by unsuitable sealers and mastics
Product Information
HMK® R152 Oil and Wax Remover is an active cleaning paste and poultice formulated to remove oil, grease, wax, mastic stains, silicone smears, and mineral deposits from natural stone, engineered stone, ceramic, porcelain, and concrete surfaces. The poultice penetrates up to 2 cm below the surface to lift embedded contaminants that ordinary surface cleaners cannot remove.
Suitable for polished, fine-honed, and textured finishes, HMK® R152 cleans without damaging properly finished stone surfaces. It also removes staining and residue left behind by unsuitable silicone sealers, grout sealers, and mastics around tile edges.
HMK® R152 is designed for both interior and exterior applications on natural and man-made stone, ceramic, porcelain, and concrete. During use, protect the treated area from direct sunlight and wind while the poultice dries. Do not apply to rubber, plastics, varnished or lacquered surfaces, or other solvent-sensitive materials.
Common Questions
HMK® R152 removes oil, grease, wax, mastic stains, silicone smears, mineral deposits, and residue left by unsuitable sealers.
Yes. It is suitable for polished, fine-honed, and textured natural stone surfaces.
It can be used on natural stone, engineered stone, ceramic, porcelain, and concrete surfaces.
The cleaning poultice penetrates up to 2 cm below the surface to lift embedded contaminants.
Yes. It is suitable for both interior and exterior applications.
Yes. Switch off underfloor heating and allow the surface to cool to room temperature before application.
Protect the treated area from direct sunlight and wind until the poultice has completely dried.
Yes. Do not apply it to rubber, plastics, lacquered or varnished surfaces, or other solvent-sensitive materials.