Recommended Add-Ons
At a Glance
Why Choose This Product
Holds compatible 2" mini polishing pads for small-format polishing setups.
Allows compatible polishing pads to be attached, removed, and changed as needed.
The 5/8"-11 thread mounts directly to compatible angle grinders and polishers.
Included extension rod provides additional separation between the tool and pad holder.
Product Information
The BIHUI Mini Angle Grinder Backer Pad connects compatible 2" mini polishing pads to a suitable angle grinder or polisher. Its Velcro hook-and-loop face holds the polishing pad during use while allowing it to be removed when a different pad or grit is needed.
A built-in 5/8"-11 thread connects the holder to compatible polishing equipment. The BIHUI Mini Backer Pad also includes an extension rod measuring approximately 1-1/4" long by 1/8" in diameter. Its maximum rated operating speed is 4,500 RPM, making tool speed an important compatibility requirement.
Common Questions
The BIHUI Mini Backer Pad is intended for compatible 2" mini polishing pads that use Velcro hook-and-loop backing. Both the pad diameter and attachment style must match the holder. Compatibility with adhesive-backed, threaded, or non-hook-and-loop pads is not specified.
The holder uses a built-in 5/8"-11 thread and requires a tool with a matching connection. The selected angle grinder or polisher must also operate within the holder's 4,500 RPM maximum rating, so both connection size and operating speed should be verified.
The BIHUI 2" Backer Pad is rated for a maximum speed of 4,500 RPM. It should not be operated above this rating. Because many angle grinders run at higher speeds, verify that the selected tool provides a compatible operating range before attaching the holder.
The included extension rod measures approximately 1-1/4" long by 1/8" in diameter, or approximately 30 mm by 3 mm. It provides an extension option for the polishing setup, but no additional extension lengths are listed in the supplied product information.
The listed package information identifies the 2" polishing pad holder and extension rod but does not list a polishing pad as included. Compatible mini polishing pads should be treated as a separate purchase unless the specific retailer package clearly states otherwise.
The holder has a built-in 5/8"-11 thread, and an M14 adapter is not listed as included. Compatibility with an M14 spindle should not be assumed. Use only an adapter or connection method specifically confirmed as suitable for the tool, holder, and operating speed.
