Certified Business
With over 100,000 orders
With over 100,000 orders
New
Aqua Mix Sealer & Coating Remover
Fast Shipping
Easy Returns
Secure Checkout
At a Glance
Quick Decision Guide
Formula
Nonflammable stripper
Maximum Dwell
Up to 1 hour
Removal Targets
Sealers, coatings and finishes
Size
1 Quart
Why Choose This Product
Key Benefits
Multipurpose Stripping
Removes most sealers, coatings, finishes, adhesives and paints.
Extended Dwell Time
Stays wet longer to help soften difficult coatings and residue.
Deep Cleaning
Dissolves deep-set stains and removes heavy grease buildup.
Epoxy Grout Haze Removal
Helps restore compatible surfaces affected by epoxy residue.
Nonflammable Formula
Provides stripping performance with a nonflammable formulation.
Broad Compatibility
Suitable for listed natural stone, ceramic, porcelain, pavers and masonry.
Product Information
Product Details
Specifications
Brand
Aqua Mix
Manufacturer
Custom Building Products
Product Type
Nonflammable multipurpose stripper
Part Number
010262-4
Quart Size
1 qt (946 ml)
Maximum Work Area
Up to 25 sq. ft. (2 m²) at a time
Maximum Dwell Time
Up to 1 hour
Application Method
Mop or brush
Removal Method
Towels or wet/dry vacuum
Surface Traffic
After 1 hour or when fumes dissipate
Drying Before Resealing
At least 24 hours
Compatible Stone
Granite, limestone, marble, slate and travertine
Additional Surfaces
Ceramic, porcelain, quarry, Saltillo, terra-cotta, cement pavers and masonry
Application Restriction
Do not spray
Not Recommended For
Resinous synthetic agglomerates
VOC Compliance
Federal EPA and SCAQMD standards
About This Product
Aqua Mix Sealer Remover for Tough Surface Restoration
Aqua Mix Sealer & Coating Remover is a nonflammable, multipurpose stripper that stays wet longer to soften and release most sealers, urethane coatings, synthetic finishes, adhesives and paints. Its extended working time helps customers tackle difficult buildup without relying on a fast-drying stripping formula.
Long-Dwell Cleaning for Haze, Stains and Grease
Beyond removing coatings, the formula dissolves deep-set stains and heavy grease buildup while helping remove epoxy grout haze. This broader cleaning range makes it useful for restoration and surface preparation projects where multiple types of residue may need to be addressed before applying a new sealer or finish.
Aqua Mix Coating Remover for Stone, Tile and Masonry
The remover is suitable for listed natural stone surfaces, including granite, limestone, marble, slate and travertine. It can also be used on ceramic, porcelain, quarry tile, Saltillo, terra-cotta, cement pavers and masonry, giving contractors one stripping product for a wide range of compatible installations.
Product Resources
Documentation & Downloads
Common Questions
Frequently Asked Questions
What can Aqua Mix Sealer & Coating Remover remove?
It is formulated to remove most sealers, urethane coatings, synthetic finishes, adhesives and paints. It also targets epoxy grout haze, deep-set stains and heavy grease buildup. Because the type and thickness of the material affect removal, heavy coatings or residue may require more than one application.
What surfaces are compatible with this coating remover?
The manufacturer lists granite, limestone, marble, slate, travertine, ceramic, porcelain, quarry tile, Saltillo, terra-cotta, cement pavers and masonry surfaces. Test a small area before full application, and prevent contact with surfaces that are not specifically recommended for the product.
How is Aqua Mix Sealer Remover applied for stripping?
Sweep or vacuum the surface, then apply a liberal amount to a manageable area of up to 25 square feet using a mop or brush. Keep the surface wet while it dwells, agitate after the coating softens, collect the residue, and rinse thoroughly with clean water.
Can it remove epoxy grout haze?
Yes. Apply the remover to an area of up to 25 square feet and spread it with a mop or brush. Let it dwell for up to one hour without drying, lightly agitate with a scrub brush, remove the dirty solution, and rinse the surface thoroughly.
How long should the remover remain on the surface?
The product may dwell for up to one hour or until the coating or residue softens. It must remain wet throughout that period. Add more remover if it begins drying, and repeat the process when thick coatings or stubborn residue remain after the first application.
When can the surface be used or resealed?
The treated area is generally ready for surface traffic after one hour or once the fumes have dissipated. Allow at least 24 hours of drying before applying Aqua Mix sealers or floor finishes. Follow the complete product label and confirm the surface is fully dry before recoating.
What surfaces or application methods should be avoided?
Do not spray the product or use it on resinous synthetic agglomerates. Prevent contact with any surface not recommended by the manufacturer. Test in a small, inconspicuous area first to confirm compatibility and determine whether the existing sealer, coating or finish responds to the remover.
What safety precautions should be followed?
Provide good ventilation and wear chemical-resistant gloves plus skin and eye protection while handling the remover. The product may be harmful if swallowed and may irritate skin or eyes. Read the full label before use and follow its first-aid instructions if exposure occurs.