Certified Business
With over 100,000 orders
With over 100,000 orders
Alpha ESC-150/ESC-250 6" Electric Wet/Dry Stone Cutter
Fast Shipping
Easy Returns
Secure Checkout
At a Glance
Quick Decision Guide
Voltage
110V
Power
1200W
Blade Diameter
6"
Maximum Cutting Depth
2"
No-Load Speed
10,000 RPM
Arbor
7/8"
Miter Capacity
Up to 1-1/4" Material
Cutting Method
Wet & Dry
Why Choose This Product
Key Benefits
Wet & Dry Cutting
Supports water-fed cutting or dry cutting with HEPA dust collection
2" Cutting Depth
Cuts through 1-1/4" stone slabs in a single pass
Miter Cutting
Handles miters in material up to 1-1/4" thick
Multiple Applications
Cuts sink holes and grooves for rodding applications
Material Versatility
Cuts stone, concrete, quartz surfaces and sintered/porcelain slabs
Kink-Free Water Hose
Improves maneuverability and reduces hose interference during cutting
HEPA Vacuum Connection
Built-in dust gate supports dust collection during dry cutting
Guide Rail Compatible
Available carriage assembly supports precise guided miter cutting
Product Information
Product Details
Specifications
Brand
Alpha®
Part Number
ESC-150
UPC
749173621413
Product Type
Electric Wet/Dry Stone Cutter
Voltage
110V
Amperage
11.2A
Power
1200W
Cutting Method
Wet & Dry
Cutting Disc Diameter
6" (150mm)
Maximum Disc RPM
10,000 RPM
No-Load Speed
10,000 RPM
Maximum Cutting Depth
2" (50.88mm)
Miter Capacity
Up to 1-1/4" (3cm) Material
Arbor
7/8" (22.23mm)
Compatible Materials
Granite, Quartz Surfaces, Marble, Limestone, Concrete & Sintered/Porcelain Slabs
Applications
Straight Cutting, Miter Cutting, Sink-Hole Cutting & Groove Cutting/Rodding
Dust Collection
Built-In Dust Gate for HEPA Vacuum Connection
Water Feed
Kink-Free Water Hose with Quick Coupler & Shut-Off Valve
Cord
15 ft (4.5m), Single Phase
Plug Type
Type A
Weight
11.30 lbs (5.12 kg)
Guide Rail Compatibility
Alpha Guide Rail System with Available Carriage Assembly
Warranty
1 Year Tool Warranty
Included Equipment
Side Handle, M6x30 Left Screw, Flange-3, 15 ft Water Hose Assembly, Water Quick Coupler with Shut-Off Valve, Carbon Brush Set, Water Valve Assembly, 3 M4x10 SS Flat Head Screws, Ground Fault Circuit Interrupter, End Cap, T-Handle Wrench, 17mm Open-End Wrench, Easy On-Easy Off Sleeve, Self-Stick Felt Strip Set & 5mm Hex Wrench
About This Product
6" Wet/Dry Cutting for Stone and Porcelain Slabs
The Alpha® ESC-150/ESC-250 Electric Wet/Dry Stone Cutter is a portable 6" cutter for granite, quartz surfaces, marble, limestone, concrete, and sintered or porcelain slabs. Its 1200W motor runs at 10,000 RPM and provides up to a 2" cutting depth, allowing 1-1/4" (3cm) stone slabs to be cut in a single pass.
Miter, Sink-Hole and Rodding Applications
The cutter handles miter cuts in material up to 1-1/4" (3cm) thick without requiring an extensive cutting setup. It can also be used for sink-hole cutting and groove cutting for rodding applications. An available carriage assembly connects the cutter to the Alpha Guide Rail System for controlled, precise miter cuts used in laminated edge fabrication.
Wet Cutting and HEPA Dust Collection
A 15 ft kink-free water hose supports wet cutting while improving maneuverability and reducing hose resistance during operation. For dry cutting, the built-in dust gate can be connected to a HEPA vacuum for dust collection at the cutter.
6" Blade Compatibility for Fabrication Work
The 7/8" arbor accepts 6" cutting discs and supports different consumables based on the material and application. Compatible options include the Alpha Katana 6" for porcelain panels and slabs and Hot-Rod 4" for groove cutting used with 1/4" steel rods and 1/8" fiberglass rods. For marble applications, Alpha recommends a Libero 5" blade for slabs that are typically 3/4" (2cm) thick or less.
Product Resources
Documentation & Downloads
Common Questions
Frequently Asked Questions
What materials can the Alpha ESC-150 and ESC-250 cut?
The cutters are designed for granite, quartz surfaces, marble, limestone, concrete, and sintered or porcelain slabs.
What is the maximum cutting depth?
The ESC-150 and ESC-250 provide a maximum cutting depth of 2" (50.88mm) and can cut 1-1/4" (3cm) stone slabs in a single pass.
Can the ESC-150 and ESC-250 make miter cuts?
Yes. They can miter material up to 1-1/4" (3cm) thick. Alpha also offers a carriage assembly for use with its Guide Rail System when precise guided miter cutting is required.
Can these stone cutters be used for wet and dry cutting?
Yes. A kink-free water hose supports wet cutting, while the built-in dust gate allows connection to a HEPA vacuum for dust collection during dry cutting.
What size cutting disc do the ESC-150 and ESC-250 use?
Both models accept 6" cutting discs with a 7/8" (22.23mm) arbor and operate at a no-load speed of 10,000 RPM.
Can these cutters be used for sink-hole and rodding work?
Yes. In addition to straight and miter cutting, the cutters can be used for sink-hole cutting and groove cutting for rodding applications.
What is the difference between the ESC-150 and ESC-250?
The ESC-150 is the 110V model rated at 11.2A with a Type A plug. The ESC-250 is the 220V model rated at 5.5A with a Type C plug. Both models use a 1200W motor, 6" cutting discs, and a 7/8" arbor.