DEWALT D36000 Wet Tile Saw: Features, Capacity & Contractor Use

The DEWALT D36000 Wet Tile Saw is a 10-inch high-capacity tile saw designed for professional cutting applications that require greater capacity without moving to a much larger stationary saw. With a 37-inch rip capacity, 41-inch plunge-cut capacity, and 18-inch cutting clearance to the left of the blade, the D36000 can handle both standard tile and many large-format tile applications.

For contractors comparing professional wet tile saws, the DEWALT D36000 Wet Tile Saw combines large cutting capacity with a jobsite-oriented design, integrated water management, and a 91-pound saw weight. Here is a closer look at its capabilities and where it fits into a professional tile-cutting setup.

What Is the DEWALT D36000?

The DEWALT D36000 is a corded 10-inch high-capacity wet tile saw. DEWALT equips it with a 15-amp motor, sliding cutting cart, stainless-steel rollers, water pan, side and rear water trays, submersible pump, cutting cart extension, and angle/rip guide.

DEWALT also offers the D36000S configuration, which pairs the D36000 saw with the D24001 tile saw stand.

DEWALT D36000 Cutting Capacity

One of the primary reasons to consider the D36000 is its cutting capacity. DEWALT specifies a 37-inch rip-cut capacity, which increases to 41 inches when using the plunge-cut function.

The saw also provides 18 inches of cutting clearance to the left of the blade, allowing a 36-inch by 36-inch tile to be ripped in half. Its 8-1/2-inch crosscut capacity is designed to accommodate applications such as 6-inch sills and 8-inch by 48-inch planks at a 30% offset.

How Accurate Is the D36000?

DEWALT specifies cutting accuracy to within 1/32 inch over a 30-inch cut. The saw uses a cut-line indicator, rigid frame, and stainless-steel rollers to support consistent alignment during cutting.

Actual finished-cut quality also depends on blade selection, blade condition, setup, material support, saw condition, and cutting technique.

Can the DEWALT D36000 Cut Large-Format Tile?

The D36000 is designed with substantially more cutting capacity than many conventional tile saws. Its 37-inch rip capacity and 18-inch clearance allow it to handle a range of larger tiles, including ripping a 36-inch by 36-inch tile in half.

However, "large-format tile" covers an enormous range of sizes. Tiles or slabs that exceed the D36000's physical capacity may require a rail saw, bridge saw, slab-cutting system, or another cutting method designed for longer material.

How Does the D36000 Manage Water?

The D36000 uses a water pan along with side, rear, and cutting-cart water attachments to help contain water generated during cutting. DEWALT states that 18-inch by 36-inch and 24-inch by 24-inch tile can be fully contained within the water-tray system, helping keep the surrounding work area cleaner and drier.

The saw also includes a submersible pump that supplies water for wet cutting. Proper water delivery helps cool the compatible wet-cutting blade while also helping suppress dust generated at the cutting point.

Is the DEWALT D36000 a Dustless Tile Saw?

No tile saw should be treated as literally dustless simply because it uses water. The D36000 is a wet tile saw, and applying water at the cutting point can substantially reduce airborne dust compared with uncontrolled dry cutting.

That distinction matters when cutting tile and stone containing crystalline silica. Wet cutting is an important dust-control method, but contractors still need to follow the safety requirements and exposure-control practices applicable to their work.

If controlling dust is one of your main reasons for choosing a wet saw, see our wet tile saw vs. dry tile saw guide for a broader comparison of the two cutting methods.

How Portable Is the DEWALT D36000?

The D36000 weighs 91 pounds according to DEWALT. Its width from the column to the edge of the cart is 28-7/8 inches, allowing the saw to fit through a standard 30-inch doorway.

Integrated storage keeps the cart extension, miter guide, and wrenches with the saw during transportation. The water attachments and pan can also be nested together for transport.

Although DEWALT describes the saw as portable to and from the jobsite, its instruction manual recommends that two people carry the machine. That is a more useful expectation than calling a 91-pound saw "lightweight."

Does the DEWALT D36000 Include a Stand?

The standard D36000 package does not include the stand. DEWALT offers the D36000S configuration with the D24001 jobsite stand included.

This distinction is worth checking when comparing listings because D36000 and D36000S packages contain the same core saw but differ in whether the stand is included.

What Blade Comes With the DEWALT D36000?

DEWALT currently lists the DW4764 10-inch porcelain tile blade with the D36000. The saw's instruction manual also identifies compatible DEWALT wet-cutting wheels for ceramic, porcelain, and glass tile applications.

The supplied blade does not mean one blade is optimal for every material. Match the diamond blade to the tile or stone being cut, the required edge quality, and the saw manufacturer's requirements.

For more help with blade selection, see our diamond blade buying guide.

What Comes With the DEWALT D36000?

According to DEWALT, the D36000 package includes the wet tile saw, DW4764 porcelain tile blade, submersible pump, water pan, side water trays, rear water trays, cutting-cart side extension, angle/rip guide, blade wrench, and hex wrench.

The D36000S package adds the D24001 stand.

DEWALT D36000 vs. D24000

The D36000 primarily makes sense when you need more cutting capacity than DEWALT's smaller D24000 wet tile saw provides. The D36000 offers a 37-inch rip capacity and weighs 91 pounds, while DEWALT specifies a 25-inch rip capacity and 69-pound weight for the D24000.

The D24000 can therefore be attractive when lower saw weight and smaller overall capacity meet the job requirements, while the D36000 provides additional room for longer tile and plank formats.

Who Is the DEWALT D36000 Best Suited For?

The D36000 is designed around professional and jobsite tile-cutting requirements. Its combination of cutting capacity, water management, sliding-cart design, transport features, and 10-inch blade platform makes it relevant for tile installers and contractors who regularly cut porcelain, ceramic, and other compatible tile materials.

It is particularly worth considering when a conventional wet saw does not provide enough capacity but the work does not require the substantially longer cutting range of a dedicated bridge or rail saw.

Should You Choose the DEWALT D36000?

Consider the D36000 if its 37-inch rip capacity, 18-inch cutting clearance, 8-1/2-inch crosscut capacity, wet-cutting system, and 91-pound saw weight fit the type of tile work you regularly perform.

Before purchasing, compare those specifications with the largest tile formats you expect to cut, the cuts you need to make, your transportation and setup requirements, and the availability of appropriate diamond blades for your materials.

For a broader look at selecting this type of equipment, see our guide to choosing a wet tile saw.

Shop the DEWALT D36000 Wet Tile Saw

Shop the DEWALT D36000 Wet Tile Saw at Tile This for professional tile-cutting applications that require greater cutting capacity. Before purchasing, compare its 37-inch rip capacity, 18-inch cutting clearance, wet-cutting system, blade requirements, weight, and other specifications with the tile formats and cutting work you regularly handle.

For help comparing the D36000 with other saw designs and capacities, see our guide to choosing a wet tile saw.