RUBIĀ® Tile Level Quick Strips are technical polymer leveling strips designed for use within the Tile Level Quick system. Manufactured from non-hygroscopic material, the strips do not require soaking before installation and maintain consistent performance during setting.
The strip thickness establishes a minimum grout joint of 1/32" (1mm) and is compatible with tile thicknesses ranging from 1/8" to 5/8". Grooved bases support proper contact with the setting material, helping maintain consistent positioning beneath the tile.
Key Features
- Technical Polymer Construction: Non-hygroscopic material does not require soaking prior to use.
- Minimum Grout Joint Control: Strip thickness establishes a minimum grout joint of 1/32" (1mm).
- Wide Tile Compatibility: Designed for tile thicknesses from 1/8" to 5/8".
- Continuous Tension System: Works with Tile Level Quick caps to maintain consistent pressure between adjacent tiles.
- Grooved Base Design: Supports proper wetting and contact with the setting material.
How It Works
- Insert the Tile Level Quick Strip beneath the tile.
- Embed the strip into the setting material.
- Thread the cap onto the exposed strip.
- Apply downward pressure to align adjacent tiles.
- Tighten the cap using Tile Level Quick Pliers.
- Allow the adhesive to set.
- Remove the strip and cap; the cap is reusable.
RUBIĀ® Tile Level Quick Strips provide the disposable leveling component within the Tile Level Quick system, supporting consistent tile alignment during installation and clean removal after the setting material has cured.
