Rubi Delta Leveling System Clips 1/16″




Rubi Delta Leveling System Clips 1/16″ were designed to avoid lippage during the installation of ceramic tiles, both on floors and walls. The Rubi Delta Leveling System Kit also helps prevent the movement tile during the setting during installation. The number of corrections in the positioning of the ceramic tile is reduced when using the Rubi Delta System. How the Delta Leveling System works is by pressing the highest piece, until it matches its position with the adjacent tiles, then obtaining a huge improvement of the surfaces flatness. Rubi Delta Leveling System Clips 1/16″ are recommended for tile sizes of 12″ x 12″ or greater in thicknesses of up to 20 mm (.78″), depending on the model of clip used. The use of the Delta System is fast, easy and cost effective. Once the installation is complete, the elements of the system are removed by impact (kick or mallet), striking the clips¬† in the direction of the grout joint. The Delta System wedges can be reused several times. The Rubi Delta Leveling System Pliers is designed to be used both in installation work of horizontal (floor) and vertical (cladding) ceramic tiles. The main function of the Delta leveling pliers is to give the wedge the necessary pressure to allow the leveling of the ceramic tile. See 1/32” clips and 1/8″ clips.


  • Available in 3 different quantities.
  • Also available in 1/16″ Kits
  • All Rubi Delta System wedges are reusable.
  • 6 positions height adjustment according to the thickness of the ceramic tile.
  • Made of PP.


  • Bag of 200
  • Bag of 400
  • Box of 2400

Additional information


Bag of 200, Bag of 400, Bag of 2400