Nuheat Membrane




Nuheat Membrane can replace a second layer of plywood/concrete board and reduces the risk of tile cracks caused by movement in the flooring assembly. When integrated with Nuheat Cables, the Membrane system is an integrated uncoupling, waterproofing, and floor heating solution. Membrane eases the installation of Nuheat Cables by simplifying the installation process. When used with the Nuheat Cable system, this method gives the installer room to adjust the wire spacing and heat output according to the specific job. The Nuheat Membrane calls for modified or un-modified thin-set mortar when placing tile on top of the membrane. One of the major benefits of using a cable and membrane system is that you can easily cut the membrane to fit and customize what areas you would like be heated. Membrane is constructed of a polypropylene sheet that is thermo-bonded to a non-woven polypropylene fabric on the underside. Available in 3 sizes.


  • Replaces backboard and self leveling cement methods
  • Reduces the risk of cracked tile
  • Uncoupling, waterproofing and floor heating solution all in one
  • Simplifies in floor heat installation
  • Fully customizable
  • Easy to cut and install
  • .22″ thick
  • Available in 161 sq/ft (3’3″ x 49.5′), 54 sq/ft (3’3″ x 16.5′), 1 sheet (3′ 3″ x 3′ 3″) 25 sheet box



Additional information

Roll Size Sq/Ft

161 sq/ft, 54 sq/ft, 10.6 sq/ft sheet, 25 10.6 sq/ft sheets