IMER IM25L Rotor/Stator Kit


SKU: IMR-IM25L-ROTOR-STATOR-KIT-1107149 Category: Tags: , , , , ,


IMER IM25L Rotor/Stator Kit is the complete mounting kit for the IM25L Rotor/Stator to enable switching between the different IMER Rotor/Stators and the IMER Prestige and Step Up 120 pumps. This mounting kit is required for the IM25L and no other mounting kit will work.  It includes everything shown in the picture.  It does not include the top mounted 50mm pressure gauge. When using the Blue IM25L Rotor/Stator for pumping of mixes with 3/8″ minus aggregates the 50mm/2 inch size hose must be used. Also the 3/8″ aggregate content of the mix cannot exceed 35% of the mix as a ratio with sand and cement.  The Blue IM25L cannot be used with the smaller 35mm/1 3/8 inch hose to pump any 3/8″ minus aggregates.

Optional for:

  • Step-Up 120A
  • Prestige 300

Required with:

  • Step-Up 120 (Single and 3 Phase)


  • Fits Pump – Prestige & Step Up 120
  • Max aggregate size ( Must USE – 50MM/2″ Hose) – 3/8″
  • Working pressure – 220 psi
  • Mounting hardware & manifold included – Yes
  • Part number – 1107149